User's Manual

Configuration Guide of XGS-5240-Series
71-5
show history all-users [detail]
Show the recent command history of all user
s. Use clear history all-users command to
clear the command history of all users saved
by the system, the max history number can
be set by history all-users max-length co
mmand.
show memory usage
Show the memory usage.
show running-config
Display the switch parameter configuration va
lidating at current operation state.
show running-config current-mod
e
Show the configuration under the current mo
de.
show startup-config
Display the switch parameter configuration wr
itten in the Flash Memory at current operatio
n state, which is normally the configuration fil
e applied in next time the switch starts up.
show switchport interface [ethern
et <IFNAME>]
Display the VLAN port mode and the belongi
ng VLAN number of the switch as well as th
e Trunk port information.
show tcp
show tcp ipv6
Display the TCP connection status establishe
d currently on the switch.
show udp
show udp ipv6
Display the UDP connection status establishe
d currently on the switch.
show telnet login
Display the information of the Telnet client w
hich currently establishes a Telnet connection
with the switch.
show tech-support
Display the operation information and the sta
te of each task running on the switch. It is u
sed by the technicians to diagnose whether t
he switch operates properly.
show version
Display the version of the switch.
show temperature
Show CPU temperature of the switch.
show fan
Show fan information of switch.
71.6 Debug
All the protocols switch supports have their corresponding debug commands. The u
sers can use the information from debug commands for troubleshooting. Debug comma
nds for their corresponding protocols will be introduced in the later chapters.