User's Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
68-2
2. To configure NTP server function
Command
Explication
Global Mode
ntp server {<ip-address> | <ipv6-addre
ss>} [version <version_no>] [key <key
-id>]
no ntp server {<ip-address> | <ipv6-a
ddress>}
To enable the specified time server of ti
me source.
3. To configure the max number of broadcast or multicast servers supported by t
he NTP client
Command
Explication
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
Set the max number of broadcast or m
ulticast servers supported by the NTP cl
ient. The no operation will cancel the c
onfiguration and restore the default valu
e.
4. To configure time zone
Command
Explication
Global Mode
clock timezone WORD {add | subtrac
t} <0-23> [<0-59>]
no clock timezone WORD
This command configures timezone in gl
obal mode, the no command deletes th
e configured timezone.
5. To configure NTP access control list
Command
Explication
Global Mode
ntp access-group server <acl>
no ntp access-group server < acl>
To configure NTP server access control
list.
6. To configure NTP authentication
Command
Explication
Global Mode
ntp authenticate
no ntp authenticate
To enable NTP authentication function.