User's Manual

Configuration Guide of XGS-5240-Series
61-5
virtual-ipv6 <ipv6-address> Interface
{Vlan <ID> | IFNAME }
no virtual-ipv6 interface
Configure the virtual IPv6 address and in
terface of VRRPv3, the no operation of t
his command will delete the virtual IPv6
address and interface.
3. Enable/disable the virtual router
Command
Explanation
VRRPv3 Protocol Mode
enable
Enable the virtual router.
disable
Disable the virtual router.
4. Configure VRRPv3 assistant parameters
(1 ) Configure VRRPv3 preempt mode
Command
Explanation
VRRPv3 Protocol Mode
preempt-mode {true| false}
Configure VRRPv3 preempt mode.
( 2 ) Configure VRRPv3 priority
Command
Explanation
VRRPv3 Protocol Mode
priority < priority >
Configure VRRPv3 priority.
( 3 ) Configure the VRRPv3 advertisement interval
Command
Explanation
VRRPv3 Protocol Mode
advertisement-interval <time>
Configure the VRRPv3 advertisement inte
rval (in cent seconds).
(4 ) Configure the monitor interface of VRRPv3
Command
Explanation
VRRPv3 Protocol Mode
circuit-failover {vlan <ID>| IFNAME} <
value_reduced>
no circuit-failover
Configure the monitor interface of VRRPv
3, the no operation of this command will
delete the monitor interface.