User's Manual

Configuration Guide of XGS-5240-Series
59-22
 Send trap: send the trap information to the network management server. In th
e trap, it records the portal server name and the status information before and
after the change of the server status.
 Send log: send the log information to the log server. In the log, it records the
portal server name and the status information before and after the change of
the server status.
 permit-all: it is also named as portal escaping. It means to cancel the portal a
uthentication temporarily and allow all the portal users accessing the network
when the portal server is in the unreachable status (down).
The server triggers the following three configurations when the status changes from
unreachable to reachable. “Send trap” and “send log” can be selected through the con
figuration; “Disable portal escaping” is enforced to carry on:
 Send trap: send the trap information to the network management server. In th
e trap, it records the portal server name and the status information before and
after the change of the server status.
 Send log: send the log information to the log server. In the log, it records the
portal server name and the status information before and after the change of
the server status.
 Disable portal escaping: If the portal server status changes to the reachable st
atus (up), the portal authentication function of VAP will be recovered. The new
user must pass the portal authentication for accessing the network.
Notice: The portal escaping function can only achieve that the new and old users
are not affected when accessing the network currently. For the situation that user cann
ot get down the line normally, there are other methods. For example, the portal server
is recovered to be UP, the access device will enforce the user to get down the line an
d it ensure that user can get down the line normally.
1.1.1.30 Portal Escaping Configuration
Portal escaping function configuration task list:
1. Enable the Portal escaping function and configure the probing interval and maximum
number of failures.
2. Show the current connection status of the Portal server.
1. Enable the Portal escaping function and configure the probing interval and ma
ximum number of failures
Command
Explanation
Captive Portal Global Configuration Mode