User's Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
58-6
Client_1 and Client_2 means two different user’s PC installed IPv6 protocol, respect
ively connect with port Ethernet1/0/12 of Switch1 and port Ethernet1/0/13 of Switch2, a
nd enable the source address check function of SAVI. Ethernet1/0/1 and Ethernet1/0/2
are uplink ports of Switch1 and Switch2 respectively, enable DHCP trust and ND trust f
unctions. Aggregation Switch3 enables DHCPv6 server function and route advertisement
function.
Configuration steps of SAVI DHCP-SLAAC scene:
Switch1>enable
Switch1#config
Switch1(config)#savi enable
Switch1(config)#savi ipv6 dhcp-slaac enable
Switch1(config)#savi check binding probe mode
Switch1(config)#interface ethernet1/0/1
Switch1(config-if-ethernet1/0/1)#ipv6 dhcp snooping trust
Switch1(config-if-ethernet1/0/1)#ipv6 nd snooping trust
Client_1
Client_2
Ethernet1/0/13Ethernet1/0/12
Switch2 Switch1
Ethernet1/0/1 Ethernet1/0/2
Switch3