User's Manual

Configuration Guide of XGS-5240-Series
58-4
no savi ipv6 mac-binding-limit
dress, no command restores the defau
lt value. Note: The binding number onl
y limits the dynamic binding, but does
not limit the static binding number.
11. Configure the check mode for SAVI conflict binding
Command
Explanation
Global mode
savi check binding <simple | probe>
mode
no savi check binding mode
Configure the check mode for the co
nflict binding, no command deletes th
e check mode.
12. Enable or disable user authentication
Command
Explanation
Port mode
savi ipv6 check source [ip-address
mac-address | ip-address | mac-addr
ess]
no savi ipv6 check source
Enable the control authentication functi
on for user, no command disables the
function.
13. Enable or disable DHCPv6 trust of port
Command
Explanation
Port mode
ipv6 dhcp snooping trust
no ipv6 dhcp snooping trust
Enable DHCPv6 trust port, no comman
d disables the trust function. (port is tr
anslated from trust port into untrust po
rt)
14. Enable or disable ND trust of port
Command
Explanation
Port mode
ipv6 nd snooping trust
no ipv6 nd snooping trust
Configure a port as slaac trust and R
A trust, no command deletes the port’
s trust function.
15. Configure the binding number
Command
Explanation
Port mode