User's Manual

Configuration Guide of XGS-5240-Series
57-9
v, delimiter of Slot ID and Port ID as “#”, delimiter of Port ID and Vlan ID as “/”.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id identifier-string efgh option
spv delimiter # delimiter /
Step6: Configure circuit-id value as bbbb on port ethernet1/0/2.
Switch(config-if-ethernet1/0/2)#pppoe intermediate-agent circuit-id bbbb
Step7: Configure remote-id as xyz on ethernet1/0/3.
Switch(config-if-ethernet1/0/3)#pppoe intermediate-agent remote-id xyz
circuit-id value is ”bbbb”, remote-id value is ”0a0b0c0d0e0f” for the added vendor tag of
port ethernet1/0/2.
circuit-id value is ”efgh eth 01#003/1234”, remote-id value is ”xyz” for the added vendor
tag of port ethernet1/0/3.
57.4 PPPoE Intermediate Agent Troubleshooting
 Only switch enables global PPPoE intermediate agent firstly, this function can be r
un on port.
 Configure a trust port at least, and this port can connect to server.
 vendor tag strip function must be configured by trust port.
 Circuit-id override priority is: pppoe intermediate-agent circuit-id < pppoe intermediat
e-agent identifier-string option delimiter < pppoe intermediate-agent access-node-id.