User's Manual

Configuration Guide of XGS-5240-Series
57-7
57.3 PPPoE Intermediate Agent Typical Application
PPPoE Intermediate Agent typical application is as follows:
Fig 13-4 PPPoE IA typical application
pppoe intermediate-agent type self-define
d remoteid {mac | vlan-mac |hostname| s
tring WORD}
no pppoe intermediate-agent type self-de
fined remote-id
Configure the self-defined remote-id.
pppoe intermediate-agent delimiter <WOR
D>
no pppoe intermediate-agent delimiter
Configure the delimiter among the fie
lds in circuit-id and remote-id
pppoe intermediate-agent format (circuit-i
d | remote-id) (hex | ascii)
no pppoe intermediate-agent format (circ
uit-id | remote-id)
Configure the format with hex or AS
CII for circuit-id and remote-id.
Port Mode
pppoe intermediate-agent
no pppoe intermediate-agent
Enable PPPoE Intermediate Agent fu
nction of port.
pppoe intermediate-agent vendor-tag stri
p
no pppoe intermediate-agent vendor-tag
strip
Set vendor tag strip function of port.
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Set a port as trust port.
pppoe intermediate-agent circuit-id <strin
g>
no pppoe intermediate-agent circuit-id
Set circuit-id of port.
pppoe intermediate-agent remote-id <stri
ng>
no pppoe intermediate-agent remote-id
Set remote-id of port.