User's Manual

Configuration Guide of XGS-5240-Series
52-4
radius-server key {0 | 7} <string>
no radius-server key
To configure the encryption key for the
RADIUS server. The no form of this co
mmand will remove the configured key.
3. Configure the RADIUS server
Command
Explanation
Global Mode
radius-server authentication host {<ipv
4-address> | <ipv6-address>} [port <p
ort-number>] [key {0 | 7} <string>] [pr
imary] [access-mode {dot1x | telnet}]
no radius-server authentication host
{<ipv4-address> | <ipv6-address>
Specifies the IPv4/IPv6 address and the
port number, whether be primary serve
r for RADIUS accounting server; the no
command deletes the RADIUS accounti
ng server.
radius-server accounting host {<ipv4-a
ddress> | <ipv6-address>} [port <port-
number>] [key {0 | 7} <string>] [prima
ry]
no radius-server accounting host {<ip
v4-address> | <ipv6-address>}
Specifies the IPv4/IPv6 address and the
port number, whether be primary serve
r for RADIUS accounting server; the no
command deletes the RADIUS accounti
ng server.
4. Configure the parameter of the RADIUS service
Command
Explanation
Global Mode
radius-server dead-time <minutes>
no radius-server dead-time
To configure the interval that the RADIU
S becomes available after it is down. T
he no form of this command will restore
the default configuration.
radius-server retransmit <retries>
no radius-server retransmit
To configure retry times for the RADIUS
packets. The no form of this command
restores the default configuration.
radius-server timeout <seconds>
no radius-server timeout
To configure the timeout value for the R
ADIUS server. The no form of this com
mand will restore the default configuratio
n.
radius-server accounting-interim-updat
e timeout <seconds>
no radius-server accounting-interim-up
date timeout
To configure the update interval for acc
ounting. The no form of this command
will restore the default configuration.