User's Manual

Configuration Guide of XGS-5240-Series
47-17
3. Supplicant related property configuration
Command
Explanation
Global Mode
dot1x max-req <count>
no dot1x max-req
Sets the number of EAP request/MD5 frame to be se
nt before the switch re-initials authentication on no su
pplicant response, the no command restores the defau
lt setting.
dot1x re-authentication
no dot1x re-authentication
Enables periodical supplicant authentication; the no co
mmand disables this function.
dot1x timeout quiet-period
<seconds>
no dot1x timeout quiet-peri
od
Sets time to keep silent on port authentication failure;
the no command restores the default value.
dot1x timeout re-authperiod
<seconds>
no dot1x timeout re-authpe
riod
Sets the supplicant re-authentication interval; the no c
ommand restores the default setting.
dot1x timeout tx-period <se
conds>
no dot1x timeout tx-period
Sets the interval for the supplicant to re-transmit EAP
request/identity frame; the no command restores the
default setting.
dot1x re-authenticate [interf
ace <interface-name> ]
Enables IEEE 802.1x re-authentication (no wait timeou
t requires) for all ports or a specified port.
47.3 802.1x Application Example
47.3.1
Examples of Guest Vlan Applications