User's Manual

Configuration Guide of XGS-5240-Series
42-15
ip igmp snooping vlan <vlan-id> mrout
er-port learnpim
no ip igmp snooping vlan <vlan-id> m
router-port learnpim
Enable the function that the specified VLA
N learns mrouter-port (according to pim pa
ckets), the no command will disable the fu
nction.
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> m
rpt
Configure this survive time of mrouter port.
The “no ip igmp snooping vlan <vlan-i
d> mrpt” command restores the default v
alue.
ip igmp snooping vlan <vlan-id> query
-interval <value>
no ip igmp snooping vlan <vlan-id> qu
ery-interval
Configure this query interval. The “no ip i
gmp snooping vlan <vlan-id> query-inter
val” command restores the default value.
ip igmp snooping vlan <vlan-id> imme
diately-leave
no ip igmp snooping vlan <vlan-id> im
mediately-leave
Enable the IGMP fast leave function for th
e specified VLAN: the “no ip igmp snoopi
ng vlan <vlan-id> immediate-leave” com
mand disables the IGMP fast leave functio
n.
ip igmp snooping vlan <vlan-id> query
-mrsp <value>
no ip igmp snooping vlan <vlan-id> qu
ery-mrsp
Configure the maximum query response pe
riod. The “no ip igmp snooping vlan <vl
an-id> query-mrsp” command restores to
the default value.
ip igmp snooping vlan <vlan-id> query
-robustness <value>
no ip igmp snooping vlan <vlan-id> qu
ery-robustness
Configure the query robustness. The “no i
p igmp snooping vlan <vlan-id> query-r
obustness” command restores to the defa
ult value.
ip igmp snooping vlan <vlan-id> suppr
ession-query-time <value>
no ip igmp snooping vlan <vlan-id> su
ppression-query-time
Configure the suppression query time. The
“no ip igmp snooping vlan <vlan-id> su
ppression-query-time” command restores
to the default value.
ip igmp snooping vlan <vlan-id> static-
group <A.B.C.D> [source <A.B.C.D>] in
terface [ethernet | port-channel] <IFNA
ME>
no ip igmp snooping vlan <vlan-id> st
atic-group <A.B.C.D> [source <A.B.C.
D>] interface [ethernet | port-channel]
<IFNAME>
Configure static-group on specified port of
the VLAN. The no form of the command c
ancels this configuration.