User's Manual

Configuration Guide of XGS-5240-Series
42-11
3) Configure the time-out of IGMP query
Command
Explanation
Interface Configuration Mode
ip igmp query-interval <time_val>
no ip igmp query-interval
Configure the interval of IGMP query messag
es sent periodically; the “no ip igmp query-i
nterval” command restores default value.
ip igmp query-max-response-time
<time_val>
no ip igmp query-max-response-ti
me
Configure the maximum response time of the
interface for IGMP query; the “no ip igmp
query-max-response-time” command restore
s default value.
ip igmp query-timeout <time_val>
no ip igmp query-timeout
Configure the time-out of the interface for IG
MP query; the “no ip igmp query-timeout”
command restores default value.
（
3
）
Config IGMP version
Command
Explanation
Global Mode
ip igmp version <version>
no ip igmp version
Configure IGMP version on the interface; the
“no ip igmp version” command restores th
e default value.
3. Disable IGMP Protocol
Command
Explanation
Interface Configuration Mode
no ip dvmrp | no ip pim dense-
mode | no ip pim sparse-mode |
no ip dvmrp multicast-routing | n
o ip pim multicast-routing
Disable IGMP Protocol.
42.2.3 IGMP Configuration Examples
As shown in the following figure, add the Ethernet ports of Switch A and Switch B
to corresponding VLAN, and start PIM-DM on each VLAN interface.