User's Manual

Configuration Guide of XGS-5240-Series
29-5
in-profile means green and out-profile
means red and yellow.
3. Apply policy to port or VLAN
Command
Explanation
Interface Mode
service-policy output <policy-map-nam
e>
no service-policy output {<policy-map-
name>}
Apply a policy map to the egress of the
port; the no command deletes the specified
policy map applied to the port or deletes all
the policy maps applied on the egress
direction of the port .
Global Mode
service-policy output <policy-map-nam
e> vlan <vlan-list>
no service-policy output {<policy-map-
name>} vlan <vlan-list>
Apply a policy map to the egress of the
VLAN; the no
command deletes the
specified policy map applied to the VLAN
interfaceor
deletes all the policy maps
applied in the egress direction of the vlan
interface .
4. Clear accounting data of the specific ports or VLANs
Command
Explanation
Admin Mode
clear mls qos statistics [interface <interface-
name> | vlan <vlan-id>]
Clear accounting data of the specified
ports or VLAN Policy Map. If there are
no parameters, clear accounting data
of all policy map.
5. Show QoS configuration
Command
Explanation
Admin Mode
show mls qos {interface [<interface-id>] [policy
| queuing] | vlan <vlan-id>}
Show QoS configuration of the port.
show class-map [<class-map-name>]
Show the class map information of
QoS.
show policy-map [<policy-map-name>]
Show the policy map information of
QoS.