User's Manual

Configuration Guide of XGS-5240-Series
230
Switch(Config-ClassMap-c1)#match access-group 1
Switch(Config-ClassMap-c1)#exit
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#policy 10000 4000 exceed-action drop
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit
Switch(config)#interface ethernet 1/0/2
Switch(Config-If-Ethernet1/0/2)#service-policy input p1
Configuration result:
An ACL name 1 is set to matching segment 192.168.1.0. Enable QoS globally, create a
class map named c1, matching ACL1 in class map; create another policy map named p1 and
refer to c1 in p1, set appropriate policies to limit bandwidth and burst value. Apply this policy
map on port ethernet1/0/2. After the above settings done, bandwidth for packets from segment
192.168.1.0 through port ethernet 1/0/2 is set to 10 Mb/s, with a burst value of 4 MB, all
packets exceed this bandwidth setting in that segment will be dropped.
Example 3: