User's Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
202
table, the switch will broadcast the unicast frame. When VLANs are configured, the
switch will forward unicast frame within the same VLAN. If the destination MAC
address is found in the MAC table but belonging to different VLANs, the switch can
only broadcast the unicast frame in the VLAN it belongs to.
23.2 Mac Address Table Configuration Task List
1 Configure the MAC address aging-time
2 Configure static MAC forwarding or filter entry
3 Clear dynamic address table
4 Configure MAC learning through CPU control
5 Configure the hash collision mac table
1. Configure the MAC aging-time
Command
Explanation
Global Mode
mac-address-table aging-time
<0|aging-time>
no mac-address-table aging-time
Configure the MAC address aging-time.
2. Configure static MAC forwarding or filter entry
3. Clear dynamic address table
Command
Explanation
Admin Mode
clear mac-address-table dynamic [address
Clear the dynamic address table.
Command
Explanation
Global Mode
mac-address-table {static | static-multica
st | blackhole} address <mac-addr> vla
n <vlan-id > [interface [ethernet | portc
hannel] <interface-name>] | [source|dest
ination|both]
no mac-address-table {static | static-m
ulticast | blackhole | dynamic} [address
<mac-addr>] [vlan <vlan-id>] [interface
[ethernet | portchannel] <interface-nam
e>]
Configure static MAC entries, static
multicast MAC entries, filter address
entires.