User's Manual

Table Of Contents

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their

respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and

applications, and makes no warranty and representation, either implied or expressed, with respect to the

quality, performance, merchantability, or fitness for a particular purpose. PLANET has made every effort to

ensure that this User's Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that

may have occurred.

Information in this User's Manual is subject to change without notice and does not represent a commitment on

the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this

User's Manual. PLANET makes no commitment to update or keep current the information in this User's

Manual, and reserves the right to make improvements to this User's Manual and/or to the products described

in this User's Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your

comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at

whose own expense.

CE Mark Warning

This device is compliant with Class A of CISPR 32. In a residential environment this equipment may cause

radio interference.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the

presence of hazardous substances in electrical and electronic equipment, end users of

electrical and electronic equipment should understand the meaning of the crossed-out

wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to

collect such WEEE separately.

Energy Saving Note of the Device

This power required device does not support Standby mode operation.

For energy saving, please remove the power cable to disconnect the device from the power circuit.

Without removing power cable, the device will still consuming power from the power source. In the view of

Saving the Energy and reduce the unnecessary power consuming, it is strongly suggested to remove the

power connection for the device if this device is not intended to be active.

Revision

User’s Manual of L2+ 24-Port 10G SFP+ plus 2-Port 40G QSFP+ Managed Switch with 36-72V DC

Redundant Power

Models: XGS-5240-24X2QR

Revision: 1.0 (August, 2019)

Part No: EM-XGS-5240 Series Configuration Guide_v1.0