User's Manual

Configuration Guide of XGS-5240-Series
196
3. Enable or disable arp-proxy function of subvlan
4. Specify or delete ip-addr-range of interface
5. Specify or delete ip-addr-range of subvlan
22.7.3 Typical Application of Super VLAN
Fig 1-13 typical of super vlan topology
Terminals of two VLANs needs to configure their addresses in the same network segment
due to requirement of LAN application. Layer-2 flows needs to be isolated, but layer-3 flows
can be forwarded normally between two terminals. Address range of VLAN3 from 1.1.1.1 to
Command
Explanation
Interface configuration mode
arp-proxy subvlan {WORD | all}
no arp-proxy subvlan {WORD | all}
Enable or disable arp-proxy
function of subvlan.
Command
Explanation
Interface configuration mode
ip-addr-range <ipv4-addrss> to <ipv4-addrss>
no ip-addr-range
Specify or delete address range
of interface.
Command
Explanation
Interface configuration mode
ip-addr-range subvlan <vlan-id> <ipv4-addrss> to
<ipv4-addrss>
no ip-addr-range subvlan <vlan-id>
Specify or delete address range
of subvlan.
VLAN
VLAN
Switch A