User's Manual

Configuration Guide of XGS-5240-Series
176
Switch(config)#vlan 10
Switch(Config-Vlan10)#switchport interface ethernet 1/0/10
Switch B:
Switch(config)#vlan 7;9;10
Switch(config)#interface ethernet 1/0/7
Switch(Config-If-Ethernet1/0/7)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/7)#switchport hybrid native vlan 7
Switch(Config-If-Ethernet1/0/7)#switchport hybrid allowed vlan 7;10 untag
Switch(Config-If-Ethernet1/0/7)#exit
Switch(Config)#interface Ethernet 1/0/9
Switch(Config-If-Ethernet1/0/9)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/9)#switchport hybrid native vlan 9
Switch(Config-If-Ethernet1/0/9)#switchport hybrid allowed vlan 9;10 untag
Switch(Config-If-Ethernet1/0/9)#exit
Switch(Config)#interface Ethernet 1/0/10
Switch(Config-If-Ethernet1/0/10)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/10)#switchport hybrid native vlan 10
Switch(Config-If-Ethernet1/0/10)#switchport hybrid allowed vlan 7;9;10 untag
Switch(Config-If-Ethernet1/0/10)#exit
22.2 GVRP Configuration
22.2.1
Introduction to GVRP
GVRP, i.e. GARP VLAN Registration Protocol, is an application of GARP (Generic
Attribute Registration Protocol). GARP is mainly used to establish an attribute transmission
mechanism to transmit attributes, so as to ensure protocol entities registering and
deregistering the attribute. According to different transmission attributes, GARP can be divided
to many application protocols, such as GMRP and GVRP. Therefore, GVRP is a protocol which
transmits VLAN attributes to the whole layer 2 network through GARP protocol.