User's Manual

Configuration Guide of XGS-5240-Series
172
7. Set Hybrid port
8. Disable/Enable VLAN Ingress Rules
9. Configure Private VLAN
10. Set Private VLAN association
11. Specify internal VLAN ID
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified
VLAN. The “no” command restores the
default setting.
Command
Explanation
Port Mode
switchport hybrid allowed vlan {WORD |
all | add WORD | except WORD | remove
WORD} {tag | untag}
no switchport hybrid allowed vlan
Set/delete the VLAN which is allowed by
Hybrid port with tag or untag mode.
switchport hybrid native vlan <vlan-id>
no
switchport hybrid native vlan
Set/delete PVID of the port.
Command
Explanation
Port Mode
vlan ingress enable
no vlan ingress enable
Enable/Disable VLAN ingress rules.
Command
Explanation
VLAN mode
private-vlan {primary | isolated |
community}
no private-vlan
Configure current VLAN to Private VLAN.
The no command deletes private VLAN.
Command
Explanation
VLAN mode
private-vlan association
<secondary-vlan-list>
no private-vlan association
Set/delete Private VLAN association.
Command
Explanation