User's Manual

Configuration Guide of XGS-5240-Series
145
Bias current（mA） 6.11(W+) 10.30 0.00 5.00 0.00
RX Power（dBM） -30.54(A-) 9.00 -25.00 9.00 -25.00
TX Power（dBM） -6.01 9.00 -25.00 9.00 -25.00
Ethernet 1/0/22 transceiver detail information: N/A
Ethernet 1/0/24 transceiver detail information:
Base information:
SFP found in this port, manufactured by company, on Sep 29 2010.
Type is 1000BASE-SX. Serial Number is 1108000001.
Link length is 550 m for 50um Multi-Mode Fiber.
Link length is 270 m for 62.5um Multi-Mode Fiber.
Nominal bit rate is 1300 Mb/s, Laser wavelength is 850 nm.
Brief alarm information: N/A
Detail diagnostic and threshold information: N/A
Explanation: If the serial number is 0, it means that it is not specified as bellow:
SFP found in this port, manufactured by company, on Sep 29 2010.
Type is 1000BASE-SX. Serial Number is not specified.
Link length is 550 m for 50um Multi-Mode Fiber.
Link length is 270 m for 62.5um Multi-Mode Fiber.
Nominal bit rate is 1300 Mb/s, Laser wavelength is 850 nm.
Example2:
Ethernet 21 is inserted the fiber module with DDM. Configure the threshold of the fiber
module after showing the DDM information.
Step1: Show the detailed DDM information.
Switch#show transceiver interface ethernet 1/0/21 detail
Ethernet 1/0/21 transceiver detail information:
Base information:
……
Brief alarm information:
RX loss of signal
Voltage high
RX power low
Detail diagnostic and threshold information:
Diagnostic Threshold
Realtime Value High Alarm Low Alarm High Warn Low Warn