User's Manual

Configuration Guide of XGS-5240-Series
143
（
2
）
Configure the enable state of the transceiver monitoring
（
3
）
Show the information of the transceiver monitoring
（
4
）
Clear the information of the transceiver monitoring
17.3 Examples of DDM
Example1:
transceiver-monitoring interval <minutes>
no transceiver-monitoring interval
Set the interval of the transceiver
monitor. The no command sets the
interval to be the default interval of
15 minutes.
Command
Explanation
Port mode
transceiver-monitoring {enable | disable}
S
et whether the transceiver
monitoring is enabled. Only the port
enables the transceiver monitoring,
the system records the abnormity
state. A
fter the port disables the
function, the abnormity information
will be clear.
Command
Explanation
Admin mode and global mode
show transceiver threshold-violation
[interface ethernet <interface-list>]
Show the information of the
transceiver monitoring, including the
last threshold-violation informatijon,
the interval of the current transceiver
monitoring and whether the port
enables the transceiver monitoring.
Command
Explanation
Admin mode
clear transceiver threshold-violation [interface
ethernet <interface-list>]
Clear the threshold violation of the
transceiver monitor.