User's Manual

Configuration Guide of XGS-5240-Series
127
[protocol] [src-ip] [vlan]
no l3 mpls field
the load-balance enhanced l3 mpls
field. The no command recovers to be
the default configuration that means
all the fields are configured.
mpls tunnel field [2nd-label] [3rd-label] [ dst-ip]
[ label-4msb] [src-ip] [ top-label]
no mpls tunnel field
This command is used to configure
the load-balanc
e enhanced mpls
tunnel field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
mim field l2payload [dst-mac] [l2-protocol]
[src-mac] [vlan]
no mim field
This command is used to configure
the load-
balance enhanced mim
l2payload field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
mim field l3payload [dst-ip] [l4-dst-port]
[l4-src-port] [protocol] [src-ip] [vlan]
no mim field
This command is used to configure
the load-
balance enhanced mim
l3payload field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
Notice: the chip of M16K-24T24S2XS
does not support this function.
mim tunnel field [dst-mac] [lookup-id] [src-mac]
no mim tunnel field
This command is used to configure
the load-
balance enhanced mim
tunnel field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
trill field l2payload [dst-mac] [l2-protocol]
[src-mac] [vlan]
no trill field
This command is used to configure
the load-
balance enhanced trill
l2payload field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
trill field l3payload [dst-ip] [l4-dst-port]
[l4-src-port] [protocol] [src-ip] [vlan]
This command is used to configure
the load-balance enhanced trill