User's Manual

Configuration Guide of XGS-5240-Series
126
3. Enter the load-balance enhanced profile mode
4. Configure the enhanced load balance template
Command
Explanation
Global Mode
load-balance enhanced profile
Enter the load-
balance enhanced
profile mode.
Command
Explanation
Load-balance Enhanced Profile Mode
l2 field [dst-mac] [ingress-port] [l2-protocol]
[src-mac] [vlan]
no l2 field
This command is used to configure
the load-balance enhanced l2 packets
field. The no command recovers to be
the default configuration that means
all the fields are configured.
l2 mpls field l2payload [dst-mac] [l2-protocol]
[src-mac] [vlan]
no l2 mpls field
This command is used to configure
the load-balance enhanced l2 mpls
field. The no command recovers to be
the default configuration that means
all the fields are configured.
l2 mpls field l3payload [dst-ip] [l4-dst-port]
[l4-src-port] [nh-or-ipprotocol][src-ip] [vlan]
no l2 mpls field
This command is used to configure
the load-balance enhanced l2 mpls
field. The no command recovers to be
the default configuration that means
all the fields are configured.
ipv4 field [dst-ip] [ingress-port] [l4-dst-port]
[l4-src-port] [protocol] [src-ip][vlan]
no ipv4 field
This command is used to configure
the load-
balance enhanced ipv4
packets field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
ipv6 field [dst-ip] [ingress-port] [l4-dst-port]
[l4-src-port] [protocol] [src-ip][vlan]
no ipv6 field
This command is used to configure
the load-
balance enhanced ipv6
packets field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
l3 mpls field [dst-ip] [l4-dst-port] [l4-src-port]
This command is used to configure