User's Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
111
2. Enable ULDP function on a port
3. Configure aggressive mode globally
4. Configure aggressive mode on a port
5. Configure the method to shut down unidirectional link
6. Configure the interval of Hello messages
7. Configure the interval of Recovery
8. Reset the port shut down by ULDP
9. Display and debug the relative information of ULDP
1. Enable ULDP function globally
Command
Explanation
Global configuration mode
uldp enable
uldp disable
Globally enable or disable ULDP function.
2. Enable ULDP function on a port
Command
Explanation
Port configuration mode
uldp enable
uldp disable
Enable or disable ULDP function on a port.
3. Configure aggressive mode globally
Command
Explanation
Global configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the global working mode.
4. Configure aggressive mode on a port
Command
Explanation
Port configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the working mode of the port.
5. Configure the method to shut down unidirectional link
Command
Explanation
Global configuration mode
uldp manual-shutdown
no uldp manual-shutdown
Configure the method to shut down
unidirectional link.