Quick Guide

7
4.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch, and
theterminalwilldisplay“running testing procedures”.
Then, the following message asks for the login user name and password. The
factory default user name and password are as follows as the login screen in
Figure4-3appears.
Username:admin
Password:admin
Figure 4-3: Managed Switch Console Login Screen
The usercan now entercommands to manage theManaged Switch. Fora detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For securityreason, please changeand memorize the newpass-
wordafterthisfirstsetup.
2.Accept command in lowercase or uppercase letter under
consoleinterface.