Quick Guide

4
2. Switch Management
To set up the Managed Switch, the user needs to congure the Managed Switch
fornetwork management.The ManagedSwitch providestwo managementoptions:
Out-of-Band ManagementandIn-Band Management.
Out-of-Band Management
Out-of-band management is the management through console interface. Generally,
the user will use out-of-band management for the initial switch conguration, or
whenin-bandmanagementisnotavailable.
In-Band Management
In-band management refers to the management by logging in to the Managed
Switchusing Telnetor HTTP,orusing SNMPmanagement softwaretocongure the
Managed Switch. In-band management enables the management of the Managed
Switchto attachsomedevices totheSwitch.Thefollowing procedures arerequired
toenablein-bandmanagement:
1. Log on to console
2.Assign/CongureIPaddress
3. Create a remote login account
4.EnableHTTPorTelnetserverontheManagedSwitch
In case in-band management fails due to Managed Switch conguration changes,
out-of-band management can be used for conguring and managing the Managed
Switch.
Important
The ManagedSwitch is shipped with Management Port IPaddress
192.168.1.1/24 assigned and VLAN1 interface IP address
192.168.0.254/24 assigned by default. User can assign another
IP address to the Managed Switch via the console interface to be
abletoremotelyaccesstheManagedSwitchthroughTelnetorHTTP.