Datasheet
XGS-5240-24X2QR
3
AC and DC Redundant Power to Ensure Continuous Operation
The XGS-5240-24X2QR is equipped with one 100~240V AC power supply unit
and one additional 36-72V DC power supply unit for redundant power supply. A
redundant power system is also provided to enhance the reliability with either AC
or DC power supply unit. The redundant power system is specifically designed to
handle the demands of high-tech facilities requiring the highest power integrity.
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
To help customer stay on top of business, the XGS-5240-24X2QR not only offers
ultra-high transmission performance, but also IPv4/IPv6 VLAN routing feature which
allows to cross over different VLAN groups and IP addresses for the purpose of
having a highly-secure, exible management.
Robust Layer 2 Features
The XGS-5240-24X2QR can be programmed for basic switch management
functions such as dynamic port aggregation, Multiple Spanning Tree Protocol
(MSTP), L2/L4 QoS bandwidth control, IPv4 IGMP snooping and IPv6 MLD
snooping. It also supports 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP
Protocol. By supporting port aggregation, the XGS-5240-24X2QR allows the
operation of a high-speed trunk combined with multiple ports.
Efficient and Secure Management
For efficient management, the XGS-5240-24X2QR is equipped with console,
Web and SNMP management interfaces. With its built-in Web-based management
interface, the XGS-5240-24X2QR offers an easy-to-use, platform-independent
management and configuration facility. For reducing product learning time, the
XGS-5240-24X2QR offers Cisco-like command via Telnet or console port so that
users do not need to learn new command.
The XGS-5240-24X2QR supports standard Simple Network Management Protocol
(SNMP) and can be managed via any standard-based management software.
Moreover, the XGS-5240-24X2QR offers secure remote management by supporting
SNMPv3, SSH and SSL connection which encrypts the packet content at each
session.
Enhanced Security
The XGS-5240-24X2QR offers comprehensive Layer 2 to Layer 4 Access
Control List (ACL) for enforcing security to the edge. It can be used to restrict
network access by denying packets based on source and destination IP address,
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoong attacks
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Management
• Management IP for IPv4 and IPv6
• Switch Management Interface
–
Console/Telnet Command Line Interface
–
Web switch management
–
SNMP v1, v2c, and v3 switch management
–
SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for
IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports DDM
• OAM EFM; OAM CFM
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms
and events)
• Supports sFlow
• Supports ULDP
• Supports ULPP (Uplink Protection Protocol)
• Supports ULSM (Uplink State Monitor Protocol)
• Supports LLDP/LLDP MED
• Supports DHCP Option82
• IPv4/IPv6 DHCP Client,
• IPv4/IPv6 DHCP Relay
• IPv4/IPv6 DHCP Snooping
• IPv4/IPv6 DHCP Server
• Supports ping, trace route function for IPv4 and IPv6
Redundant Power System
• Redundant 100~240V AC/36-72V DC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
GroundingDC Power Input
AC Power Input