Datasheet

WS-2864PVR
3
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Tra󰀩cpolicingontheswitchport
• DSCP remarking
Multicast
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMPSnoopingportltering
• MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnoopingtolteruntrustedDHCPmessages
• DynamicARPInspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– 2.4” inch LCD touch screen
– Web switch management
Unique PoE Management Features
The WS-2864PVR has a built-in L2/L4 Gigabit Switching engine and 24
10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+, with a total power
budgetofupto400Wfordi󰀨erentkindsofPoEapplications.Itperfectlymeets
the power requirements of PoE Wi-Fi access points including dual-band or
outdoor high-power AP/CPE with high power consumption. As a managed PoE
switch for stable and reliable wireless AP operation, the WS-2864PVR features
the following intelligent PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
Layer 3 Routing Support
The WS-2864PVR enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and
the OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an
interior dynamic routing protocol for autonomous system based on link state.
The protocol creates a database for link state by exchanging link states among
Layer 3 switches, and then uses the Shortest Path First algorithm to generate
a route table based on that database.
IPv4/IPv6 Dual Stack Management Network
The WS-2864PVR offers IPv4/IPv6 VLAN routing feature which allows to
crossoverdi󰀨erentVLANsanddi󰀨erentIPaddressesforthepurposeofhaving
ahighly-secure,exiblemanagementandsimplernetworkingapplication.With
the support for IPv6/IPv4 protocol, and user-friendly management interfaces,
the WS-2864PVR is the best choice for system integrators to migrate network
infrastructure from the IPv4 to the IPv6 network. It also helps SMBs to step
in the IPv6 era with the lowest investment and without having to replace the
network facilities even though ISPs establish the IPv6 FTTx edge network.
Optimal Redundant Ring for Faster Recovery of Managed Network
The WS-2864PVR supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advancedITU-TG.8032ERPS(EthernetRingProtection
Switching) technology, and Spanning Tree Protocol (802.1w RSTP) into
customer’s network to enhance system reliability and uptime in harsh
environments. In a certain simple ring network, the recovery time could be less
than50ms to quickly bring the network back, thus enabling the management
network to keep on operating.
IPv4 Network
IPv6 Network
Application
IPv6
Stack
IPv4
Stack
Transport Layer
TELNET WEB
SSHSNMP
ICMPSSL
DHCPNTP
IPv6 Management HostIPv4 Management Host
WS-2864PVR