Datasheet
Data Sheet
1
Key Features
WS-2864PVR
1
Wireless AP Managed Switch with 24-Port 802.3at PoE +
4-Port 10G SFP+ + LCD Touch Screen and 48VDC Redundant Power
Physical Port
• 2410/100/1000BASE-T Gigabit RJ45 copper ports with 24-port
IEEE802.3af/atPoE+ injector
• 410GBASE-SR/LRSFP+slots, compatible with 1000BASE-
SX/LX/BX SFP
• RS-232 RJ45 console interface for switch basic management
and setup
Wireless LAN AP Management
• Dashboard: provides at-a-glance view of system and wireless
network status
• AP Discovery: one key to discover the managed APs on the
managed LAN
• CustomizedProle:allowsmultiplewireless prolescreation
and maintenance
• Auto Provision: multi-AP provisioning with one click
• ClusterManagement:simplieshigh-densityAPmanagement
• Zone Plan: optimizes AP deployment with actual signal
coverage
• Analysis: real-time AP status monitoring
• Scalability:freesystemupgradeandAPrmwarebulkupgrade
capability
Power over Ethernet
• Up to 24 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
– PoE Port status monitoring
– Total PoE power budget control
– Over temperature protection
– PoE usage threshold
– Temperature threshold
– Per port PoE function enable/disable
– PoE Port power feeding priority
– Per PoE port power limit
– PDclassicationdetection
– Sequence port PoE
Enterprise Wireless Management Solution with PoE
PLANET WS-2864PVR, an enhanced Wireless AP Managed Switch, features
SmartAPcontrol, Layer3OSPF/staticrouting and Intelligent PoE capability
to enable service providers and IT managers to control all wireless APs at the
same time in medium- and large-scale wireless network environments. The
WS-2864PVR provides IPv6/IPv4 dual stack management and built-in L2/L4
Gigabit Switching engine along with 2410/100/1000BASE-T ports featuring up
to 36-watt802.3atPoE+, and 4 extra 10GigabitBASE-XSFP+fiberslots.
This is definitely the best network solution for a quick, safe and cost-effective
AP control with Power over Ethernet for enterprises.
Five Steps to Manage AP Cluster within Minutes
TheWS-2864PVRoersauser-friendlyWebGUIforeasyconguration.Itfeatures
centralized management of PLANET Smart AP series without needing to manually
configure each AP for the wireless SSID, radio band and security settings. With
a five-step configuration process, different purposes of wireless profiles can be
simultaneously delivered to multiple APs or AP groups to minimize deployment
time,eortandcost.
Optimizing Wi-Fi Deployment with Floor Maps
Importing your floor maps and locating each AP or AP group according to the
field deployment can save your time and cost of on-site support and monitoring.
It shows real-time AP status, and its signal heat map is capable of reflecting the
actual coverage and helps the administrator to fine-tune the overlapping of the
adjacent APs anytime to optimize the wireless network performance.
Control Room
Visualizing Wi-Fi Signals through Map
WLAN Controller
CH48
Tx: 70%
CH1
Tx: 70%
CH36
Tx: 100%
CH1
Tx: 100%
CH11
Tx: 100%
CH40
Tx: 50%
CH6
Tx: 35%