Manualshelf

Quick Guide

ManualsBrandsPLANET Technology ManualsSwitch AP ControllerWireless AP Managed Switch with 8-Port 802.3at PoE + 2-Port 10G SFP+
12345678910
8
4. Starting AP Management
There are dierent models including indoor and outdoor AP series that can be
managedbyAPManagedSwitch.
Note
Please regularly check PLANET website for the latest managed AP
compatibility list.
For the AP models that do not support DHCP IP, please congure them to use a
dierentstaticIPbeforeconnectingthemtothesamemanagednetwork.
If you prefer to use DHCP IP for the AP models that support DHCP IP, please
ensuretheDHCPserverexistsinthemanagednetwork.
Step 1. In the AP Managed Switch, go to “System-> DHCP Server-> Mode”
page to enable DHCP server and then go to “Maintenance-> Switch
Maintenance-> Save Startup Cong” to click “Save Conguration”.
Figure 4-1 DHCP Server
Figure 4-2 Save Conguration
Note
If you have configured the AP to static IP or the DHCP server is
already existed in the managed network, ignore this step and
continuetheAPmanagementaccordingtothefollowingsteps.