Datasheet

8
WS-1032P
Power over Ethernet
PoE Standard
IEEE 802.3atPoE Plus, PSE
Backward compatible with IEEE 802.3af PoE PSE
PoE Power Supply Type End-span
PoE Power Output Per port 52V DC, max. 36watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget
120 watts (max.) @ 25 degrees C
100 watts (max.) @ 50 degrees C
PoE Ability
PD @ 7 watts 8 units
PD @15.4 watts 7 units
PD @ 30.8 watts 3 units
Layer 3 Functions
IP Interfaces Max. 128 VLAN interfaces
Routing Table Max. 128 routing entries
Routing Protocols
IPv4 RIPv2
IPv4 OSPFv2
IPv6 OSPFv3
IPv4 hardware static routing
IPv6 hardware static routing
Layer 2 Management Functions
PortConguration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable/enable
Port Status Displayeachport’sspeedduplexmode,linkstatus,owcontrolstatus,autonegotiationstatus,trunkstatus
Port Mirroring
TX/RX/Both
Many-to-1 monitor
Supports up to 5 sessions
VLAN
IEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 4K VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/static trunk
Supports 5 trunk groups with 10 ports per trunk
IGMP Snooping
IPv4 IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IPv4 IGMP Querier mode support
MLD Snooping
IPv6 MLD (v1/v2) Snooping, up to 255 multicast groups
IPv6 MLD Querier mode support
Ring
Supports ERPS, and complies with ITU-T G.8032
Recovery time < 10ms @ 3 nodes
Recovery time <50ms @ 16 nodes
Supports Major ring and sub-ring
Access Control List
IP-based ACL/MAC-based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 10Kbps~13000Mbps
Egress: 10Kbps~13000Mbps
QoS
Trafcclassicationbased,strictpriorityandWRR
8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
-DSCP/TOSeldinIPpacket