Datasheet

WS-1032P
3
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingpoliciesontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IGMPSnoopingportltering
• MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source GuardpreventsIPspoongattacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
10Gbps Ethernet Uplink for High-volume Transmission
As to the bandwidth, the WS-1032P offers 10Gbps uplink ports to relieve huge
networktrafc.Eachofthe10GSFP+slotsintheWS-1032Psupportstriple speed
and 10GBASE-SR/LR, 1000BASE-SX/LX or 2500BASE-X. With its 10G Ethernet
link capability, the administrator now can flexibly choose the suitable SFP/SFP+
transceiver according to the transmission distance or the transmission speed required
to extend the network efficiently. The WS-1032P provides greater bandwidth and
powerfulprocessingcapacitytomakecentralmanagementmoreefcient.
Unique PoE Management Features
The WS-1032P has a built-in L2/L4 Gigabit Switching engine and 8
10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+, with a total power
budget of up to 120W for different kinds of PoE applications. It perfectly meets the
power requirements of PoE Wi-Fi access points including dual-band or outdoor
high-power AP/CPE with high power consumption. As a managed PoE Switch for
stable and reliable wireless AP operation, the WS-1032P features the following
intelligent PoE management functions:
■PDAliveCheck
■ScheduledPowerRecycling
■SMTP/SNMPTrapEventAlert
■PoESchedule
Intelligent PoE Management Features
PoE Schedule
Scheduled
Power Recycling
PD Alive Check
PoE Usage
Layer 3 Routing Support
The WS-1032P enables the administrator to conveniently boost network efficiency
by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, the RIPv1/v2 and
the OSPFv2/v3 (Open Shortest Path First) settings automatically. The OSPF is an
interior dynamic routing protocol for autonomous system based on link state. The
protocol creates a database for link state by exchanging link states among Layer3
switches, and then uses the Shortest Path First algorithm to generate a route table
based on that database.
IP Domain B
192.168.2.x
Data
IP Domain C
192.168.3.x
Data
IP Domain A
192.168.1.x
Data
Wire-speed VLAN Routing
IPv4/IPv6 Dual Stack Management Network
The WS-1032P offers IPv4/IPv6 VLAN routing feature which allows to crossover
different VLANs and different IP addresses for the purpose of having a highly-
secure, flexible management and simpler networking application. With the support
for IPv6/IPv4 protocol, and user-friendly management interfaces, the WS-1032P is
the best choice for system integrators to migrate network infrastructure from the
IPv4 to the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest
investment and without having to replace the network facilities even though ISPs
establish the IPv6 FTTx edge network.