User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-90-
Threshold (5~3600)
Router will startup the blocking function immediately.
Enable UDP-FLOOD
Filtering
Enable or Disable the UDP-FLOOD Filtering.
UDP-FLOOD Packets
Threshold (5~3600)
The default value is 500. Enter a value between 5 ~ 3600. When the
current UPD-FLOOD Packets number is beyond the set value, the
Router will startup the blocking function immediately.
Enable TCP-SYN-FLOOD
Attack Filtering
Enable or Disable the TCP-SYN-FLOOD Attack Filtering.
TCP-SYN-FLOOD
Packets Threshold
(5~3600)
The default value is 50. Enter a value between 5 ~ 3600. When the
current TCP-SYN-FLOOD Packets numbers is beyond the set value,
the Router will startup the blocking function immediately.
Ignore Ping Packet From
WAN Port
Enable or Disable Ignore Ping Packet From WAN Port. The default
setting is disabled. If enabled, the ping packet from the Internet cannot
access the Router.
Forbid Ping Packet From
LAN Port
Enable or Disable Forbid Ping Packet From LAN Port. The default
setting is disabled. If enabled, the ping packet from LAN cannot access
the Router. This function can be used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
DoSProtection will take effect only when the Traffic Statistics in “System Tool →
Traffic Statistics” is enabled.
5.11.3 Local Management
Choose menu “Security → Local Management”, and you can configure the management rule in the
screen as shown in Figure 5-47. The management feature allows you to deny computers in LAN from
acce
ssing the Router.