User's Manual

User’s Manual of WNRT-617
-84-
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
1) When the trigger connection is released, the related opening ports will be closed.
2) Each rule is allowed to be used only by one host on LAN synchronously. The
trigger connection of other hosts on LAN will be refused.
3) Incoming Port Range cannot overlap each other.
5.10.3 DMZ
Choose menu “Forwarding→DMZ”, and you can view and configure DMZ host in the screen (shown
in Figure 5-42).The DMZ host feature allows one local host to be exposed to the Interne
t for a
special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all the
ports at the same time. Any PC whose port is being forwarded must have its DHCP client function
disabled and should have a new static IP Address assigned to it because its IP Address may be
changed when using the DHCP function.
Figure 5-42 DMZ
T
o assign a computer or server to be a DMZ server:
Step 1. Click the Enable radio button
Step 2. Enter the local host IP Address in the DMZ Host IP Address field