User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-74-
5.8 DHCP
There are three submenus under the DHCP menu (shown in Figure 5-31): DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
Figure 5-31 The DHCP
menu
5.8.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, and you can configure the DHCP Server on the page
(shown in Figure 5-32).The Router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) se
rver, which provides the TCP/IP configuration for all the PC(s) that are connected to the
Router on the LAN.
Figure 5-32 DH
CP Settings