User's Manual

User’s Manual of WNRT-617
-63-
BSSID(to be bridged)
The BSSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the BSSID to join.
Search
Click this button, you can search the AP which runs in the current
channel.
Key type
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type.
WEP Index
This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the index of the WEP key.
Auth Type
This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the authorization type of the Root AP.
Password
If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
5.7.2 Wireless Security
Choose menu “Wireless→Wireless Security”, and you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the Router:
 WEP (Wired Equivalent Privacy)
 WPA (Wi-Fi Protected Access)
 WPA2 (Wi-Fi Protected Access 2)
 WPA-PSK (Pre-Shared Key)
 WPA2-PSK (Pre-Shared Key)