User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-58-
Figure 5-17 LAN Settings
The page includes the following fields:
Object Description
MAC Address
The physical address of the Router, as seen from the LAN. The value
can't be changed.
IP Address
Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.1.1).
Subnet Mask
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
1. If you change the IP Address of LAN, you must use the new IP Address to
login the Router.
2. If the new LAN IP Address you set is not in the same subnet, the IP Address
pool of the DHCP server will change accordingly at the same time，while the
Virtual Server and DMZ Host will not take effect until they are re-configured.