User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-40-
5.4 Operation Mode
Figure 5-3 Operation Mode
The page includes the following fields:
Object Description
Client Router
In this mode, the device enables multiusers to share Internet from
WISP. The LAN port devices share the same IP from WISP through
Wireless port. While connecting to WISP, the Wireless port works as a
WAN port at AP Client Router mode. The ethernet port acts as a LAN
port.
Router
In this mode, the device enables multiusers to share Internet via
ADSL/Cable Modem.The wireless port share the same IP to ISP
through ethernet WAN port. The Wireless port acts the same as a LAN
port while at AP Router mode.
Multi-SSID
In this mode, the device can create up to 4 wireless networks labeled
with different SSIDs and assign each SSID with different security or
VLAN, especially for the situation when the various access policies and
functions are required.
Repeater(Range
Extender)
In this mode, the device can copy and reinforce the existing wireless
signal to extend the coverage of the signal, especially for a large space
to eliminate signal-blind corners.