User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-35-
Chapter These settings are only for basic wireless parameters. For advanced settings, please refer to
5.7 Wireless.
Step 5. Click the Next button. You will then see the Finish page.
If you don’t make any change on the Wireless page, you will see the Finish page as shown in
Figure 4-18. Click the Finish button to finish the Qu
ick Setup.
Figure 4-18 Quick Setup
– Finish (No wireless parameter changed)
If there is something changed on the Wireless page, you will see the Finish page as shown in
Figure 4-19. Click the Re
boot button to make your wireless configuration to take effect and finish
the Quick Setup.
Figure 4-19 Quick Setup
– Finish (Reboot is required)
After the rebooting, please check whether you can access the Internet or not in the 5.2 Status
page.