User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-112-
Ingress Bandwidth
The download speed through the WAN port.
5.15.2 Rules List
Choose menu “Bandwidth Control → Rules List”, you can view and configure the Bandwidth
Control rules in the screen below.
Figure 5-73 Bandwidth Control Rules List
The page includes the following fields:
Object Description
Description
This is the information about the rules such as address range.
Egress bandwidth
This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
Ingress bandwidth
This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
Enable
This displays the status of the rule.
Modify
Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New… shown in Figure 5-73, you will see a new screen shown in Figure 5-74.
Step 2: Enter the information like the screen shown below.