User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-111-
5.15 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 5-71. Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
Figure 5-71 Bandwi
dth Control
5.15.1 Control Settings
Choose menu “Bandwidth Control → Control Settings”, you can configure the Egress Bandwidth
and Ingress Bandwidth in the next screen. Their values you configure should be less than 100000Kbps.
For optimal control of the bandwidth, please select the right Line Type and ask your ISP for the total
bandwidth of the egress and ingress.
Figure 5-72 Bandwidth Control Settings
The page includes the following fields:
Object Description
Enable Bandwidth
Control
Check this box so that the Bandwidth Control settings can take effect.
Line Type
Select the right type for you network connection. If you don’t know how
to choose, please ask your ISP for the information.
Egress Bandwidth
The upload speed through the WAN port
.