User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-110-
Status
Select Enabled or Disabled for this entry on the Status pull-down list.
Step 3. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to view
the information in the next screen.
5.14.2 System Routing Table
Choose menu “System Routing Table”, and you can check all of the valid route entries in use. The
Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each entry. Click
the Refresh button to refresh the data displayed.
Figure 5-70 System Routing Table