User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connect to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-60-
5.7 DHCP
There are three submenus under the DHCP menu (shown in Figure 5-18): DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
Figure 5-18 The DHCP menu
5.7.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, you can configure the DHCP Server on the page (shown in
Figure 5-19).The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN.
Figure 5-19 DHCP Settings
The page includes the following fields:
Object Description
DHCP Server
Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must