User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. Quick Connect to a Wireless Network
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- EC Declaration of Conformity
User’s Manual of WNRT-617
-23-
These settings are only for basic wireless parameters. For advanced settings, please refer to Section
5.6: “Wireless”.
Step 5. Click the Next button. You will then see the Finish page.
If you don’t make any change on the Wireless page, you will see the Finish page as shown in
Figure 4-17. Click the Finish button to finish the Quick Setup.
Figure 4-17 Quick Setup – Finish
If there is something changed on the Wireless page, you will see the Finish page as shown in
Figure 4-18. Click the Reboot button to make your wireless configuration to take effect and finish
the Quick Setup.
Figure 4-58 Quick Setup – Finish
After the rebooting, please check whether you can access the Internet or not in the 5.2 Status
page.