User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Installation Guide
- Chapter 4. Configuration in Web UI
- Chapter 5. Quick Connection to a Wireless Network
- Appendix
- EC Declaration of Conformity
User’s Manual of WNRT-300
-41-
Figure 4-27 Port Forwarding
Object Description
Enable Port Forwarding
Enable Port Forwarding function
IP Address
Add LAN IP address of specified host or server on the private local
network
Protocol
Select the port number protocol type (TCP, UDP or both). If you are
unsure, then leave it to the default both protocol
Port Range
Add ports you want to control. For TCP and UDP Services, enter the
beginning of the range of port numbers used by the service. If the
service uses a single port number, enter it in both the start and finish
fields.
Comment
The description of this setting
Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to
delete it.