User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Installation Guide
- Chapter 4. Configuration in Web UI
- Chapter 5. Quick Connection to a Wireless Network
- Appendix
- EC Declaration of Conformity
User’s Manual of WNRT-300
-35-
Figure 4-21 LAN Interface
Object Description
IP Address The LAN IP address of the WNRT-300, and default is 192.168.1.1. You
can change it according to your request.
Subnet Mask Default is 255.255.255.0. You can change it according to your request.
Default Gateway Default is 0.0.0.0. You can change it according to your request.
DHCP You can select one of Disable, Client, and Server. Default is Server,
that the WNRT-300 can assign IP addresses to the computers
automatically.
DHCP Client Range For the Server mode, you must enter the DHCP client IP address
range in the field. And you can click the “Show Client” button to show
the Active DHCP Client Table.
Static DHCP Click the “Set Static DHCP” button, and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Domain Name Default is Router.
802.1d Spanning Tree
You can enable or disable the spanning tree function.
Clone MAC Address
You can input a MAC address here for using clone function.