User Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Troubleshooting
- Appendix C: Frequently Asked Questions
User Manual of WNAP-6315
-79-
After the configuration, please click the “Apply Changes” button to save the settings.
Figure 5-9-1 QoS
The page includes the following fields:
Object Description
Enable QoS
Check the box to enable the QoS function.
Automatic Uplink Speed
Check the box to adjust the uplink speed automatically by the WNAP-6315.
Or enter the uplink data rate manually in the field below.
Automatic Downlink
Speed
Check the box to adjust the downlink speed automatically by the
WNAP-6315. Or enter the downlink data rate manually in the field below.
QoS Rule Setting
To set the priority rule, you can appoint the computer by IP address or MAC
address, and enter it in the correct field. Select minimum or maximum
bandwidth, and then fill the uplink and downlink data rate into the field.