User Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Troubleshooting
- Appendix C: Frequently Asked Questions
User Manual of WNAP-6315
-76-
5.5.4 Port Forwarding
Choose menu “Firewall Port Forwarding”, and you can configure to re-direct a particular range of service
port numbers from the Internet network to a particular LAN IP address. It helps users to host some servers
behind the firewall.
After the configuration, please click the “Apply Changes” button to save the settings.
Figure 5-6-1 Port Forwarding
The page includes the following fields:
Object Description
Enable Port Forwarding Enable Port Forwarding function
IP Address Add LAN IP address of specified host or server on the private local network
Protocol Select the port number protocol type (TCP, UDP or both). If you are unsure,
then leave it to the default both protocol
Port Range Add ports you want to control. For TCP and UDP Services, enter the beginning
of the range of port numbers used by the service. If the service uses a single
port number, enter it in both the start and finish fields.
Comment The description of this setting
Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to delete it.