User Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Troubleshooting
- Appendix C: Frequently Asked Questions
User Manual of WNAP-6315
-55-
Default Setting: "Disabled"
Multicast to Unicast: Enables multicast traffic streams to be converted to unicast traffic
before delivery to wireless clients. Converting multicast traffic to unicast
before sending to wireless clients allows a longer DTIM (Data Beacon
Rate) interval to be set. A longer DTIM interval prevents clients in
power-save mode having to activate their radios to receive the multicast
data, which reduce power consumption.
Default Setting: “Enabled”
RF Output Power Users can adjust the wireless output power to different levels. For
short distance of PtP connection within 1Km, it is suggested to reduce
the output power to 50% or lower to prevent interference with each
other.
Default is “100%”.
5.4.3 Security
Choose menu “Wireless Security” to configure the settings of wireless security for the wireless network on
this page. After the configuration, please click the “Apply Changes” button to save the settings.
Figure 5-36 Wireless Security Settings
The page includes the following fields:
Object Description
Select SSID
Select the SSID you want to configure the wireless security function, which
includes the root one and the client one.
Encryption Disable:
No security setup for wireless connection.