User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Factory Default Settings
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
User’s Manual of WNAP-1110
-92-
The page includes the following fields:
Object Description
From Your mail box address. The AP would connect it to send logs.
To Recipient’s address. The destination mailbox where the logs would be
received.
SMTP Server Your SMPT server. It corresponds with the mailbox filled in the From field. You
can log on the relevant website for Help if you are not clear with the address.
Authentication Most SMTP Server requires Authentication. It is required by most mailboxes
that need User Name and Password to log in.
User Name Your mail account name filled in the From field. The part behind @ is
excluded.
Password Your mail account password.
Confirm The Password Enter the password again to confirm.
Enable Auto Mail
Feature
Select it to mail logs automatically. You could mail the current logs either at a
specified time everyday or by intervals, but only one could be the current
effective rule.
Everyday, at specified time, the Device will automatically send the log to
specified mailbox.
Every few hours, such as 2 hours, the Device will automatically send the
log to specified mailbox.
Only when you select Authentication, you have to enter the User Name and Password in the
following fields.